WVD 230W-260W Input DC22V-60V Waterproof

WVD 230W-260W Input DC22V-60V Waterproof

This WVD 230W-260W series inverter is on grid waterproof micro solar inverter with IP65.Multiple small power inverters in parallel can achieve large output power.

Need More Info?Feel free to contact with our customers service manager@powerelek.com,we will give u the reply within 24 hours!


Main Features:

*Recommend use PV panels:300W/Vmp>34V/Voc<50V                

*Max input voltage:50V                                                          

*Peak power tracking voltage :25V-40V                          

*Operation voltage range:17V-50V                                           

*MIN/MAX start voltage:22V-50V                                              

*MAX input current :9.8A

*Output AC voltage:90V-140/180~260VAC                                 

* Rated Output Power:230W 

* Wave Form:Pure Sine Wave                                                   

* System Operation:APL/MPPT                                                 

*Recommend using the power more than 30W and the standard voltage of 36V PV panels.Suggestion making the PV in parallel.

* Installation: Waterproof IP65 ,outdoor Type Design

System Function:

1,Power line carrier-current communication

2, 6-grade power search

3,Operation voltage range:17V-50V   

4,High-frequency two-way and one-way grid function

5,Kinds of frequency output function.

6,Directly connected to the solar panels (do not need to connect the battery)

7,AC 0 angle with high precision auto-detection

8,Synchronous High-frequency Modulation

9,Pure Sine Wave Output

10,Automatic Sensing Function Solar Luminosity

11,Power Automatically Locked (APL)

12,Automatically Adapt To Different Load Power Factor 

13,Constant Current, Constant Power

14,Automatically Shut Down When The Power Grid Fault

15,Stack Multiple Machines

16,High-Frequency High Conversion Rate 

17,Maximum Power Point Tracking (MPPT)

System function:
 Power line carrier-current communication
 6-grade power search
 Wide voltage input(22-60VDC)
 High-frequency two-way and one-way grid function
 Kinds of frequency output function.
 Directly connected to the solar panels (do not need to connect the battery)
 AC 0 angle with high precision auto-detection
Synchronous High-frequency Modulation
Pure Sine Wave Output
Automatic Sensing Function Solar Luminosity
Power Automatically Locked (APL)
Automatically Adapt To Different Load Power Factor 
Constant Current, Constant Power
Automatically Shut Down When The Power Grid Fault
Stack Multiple Machines
High-Frequency High Conversion Rate 
Maximum Power Point Tracking (MPPT)

Stack using

 In order to achieve higher power use requirements, this product can be stacked. Such as: 4 micro inverter of 260W stacking can achieve 1040W. And the number of the stacking is unlimited.    

LED display

Finished all the connections, confirm the AC and DC connection is right. The LED is red when the AC power is unconnected and the LED shows like below when the AC power is connected.  The LED shows like below:

A)       Power failure display

LED in red:

1.        Power cut off

2.        Output failure

3.        Power grid fault

4.        DC low- voltage display(protection)

5.        DC over-voltage display(protection)

6.        Over temperature display(protection)

B)       Power adjust display

1.        LED in green, but flashing, it means power is in adjusting condition.

2.        LED in green and steady, it means the power is locked, and the inverter works.

System recommend : 
Residential / Business systems and power plants rooftops, grounds,hills and anywhere in the sun with micro inverters, Outdoor type design IP65, mounting on the brackets saving more money,Reduced design costs & Lower installation cost of energy;


The solar power system is to make electricity for TV,Washing machine, Refrightor, Microwave oven,Lights, Air conditioners etc., and the extra solar power electric will be automatically uploaded to the utility grid with allowance paid by local gorvernment if the policy suppots.

Specification as below:




Recommend use solar panels 


DC MAX input current


AC MAX output power



DC MAX Open-circuit input-voltage


DC input voltage range


MAX output power factor


DC input Reverse voltage protection


AC output voltage range

(120V versions 90~160VAC)(230V versions 190~260VAC)

AC frequency range


Output current total harmonic distortion


AC Phase


Islanding protection


Output short circuit protection



LED mode power instruction voltage instruction
AC frequency instruction over-voltage instruction

Communication way

60KHz modulation,power line carrier-current communication

Standby Power


Night Power


Ambient temperature range

-25 ℃~60℃


0~100%(Indoor Type Design)



Electromagnetic Compatibility

EN50081.part1   EN50082.part1

Power System Disturbance

EN61000-3-2  EN62109

Network test

DIN VDE 1026 UL1741



Net weight


Gross  weight


Size (L x W x H)


Package (L x W x H)

Inner box:31x12x8.5CM

Big box:54x33x51CM


Back of solar panel

  • Related Products